The NEW Wireless or Wired safety edge system from justn one controller.
You choose, hard wired or radio safety edge- all other components remain the same.
Wirelss: A battery powered door transmitter sends radio signals at 2.4GHz to the door controller to stop and reverse a closing door if an obstacle is detected.
The safety edge is completely wireless and very simple to install and programme using 8.2 resistive or optical sensors.
The Wired version uses the same 8.2 resistive or optical safety edge but replaces the door transmitter with a neat junction box and spiral cable.Various rubber profiles are available making this system suitable for use with any tubular motor up to 100Nm's.

Built on Light
Push button lid
Autotest of safety edge
Courtesy light
Photocell connections
Up to 20 transmitters can be programmed
Optional upgrade with GSM to open with No Cost GSM switch
Frequency 868MHz

Roller Shutters:

Radio control of roller shutters is achieved with our range of receivers such as the TEL-TVPRS868 built in receiver. Small in size this compact receiver can control 1 tubular motor up to 350W with the facility to wire in a local switch. A choice of outputs for both 230Vac and 24Vdc tubular motors.

The Venus range of radio receivers can be used to control tubular motors up to 780W but have additional features such as photocell connections and a choice of impulse or dead-man operation. Optional built on lights and push buttons are also available as upgrades.

Gates And Barriers:
We offer a huge range of radio solutions for gates and barriers from both Teleco and Ditec. From simple plug in receivers to full access control solutions.