Tubular Motors - Manual Override
Manual Override Motors Type 9 & 11 from elero.
The tubular motors types 9 & 11 are manufactured in Germany under strict quality control conditions and guarantee reliable motorisation for roller shutters and garage doors.
- Wide range of torque from 13Nm- 120Nm
- Easy to set mechanical limit switches
- Plug in cable
- 7mm Manual override
Why not convert your existing manual override motor to radio control? Simply plug in the Combio receiver to convert an existing motor, then choose from a wide selection of transmitters from the proline 2 range.
Alternatively, choose one of our wired radio control solutions with radio safety edge for garage doors or simple receiver for shutters.
Type 15 Series NHK Motors from Elero.
Probably the best motor in its class! The type 15 motor was the first of its kind and has evolved into the smoothest most reliable drive for larger roller shutters and doors. With permanent manual override, the type 15 is still regarded as the best in its class.
- Torque range 150, 180, 230 and 300Nm,
- Mechanical adjustment of end positions
- Permanent manual override function
- Adapters from 98mm to 168mm.
Optional extras include low level emergency manual override systems with integrated key switch and gearbox. Connect the extending shaft from the motor to the low level gear box for 2:1 manual operation at ground level.
If the manual override needs to be used from outside, install the 300mm extension piece through the wall and into the rear of the key switch. Normal operation is through the use of the Key switch. In the event of power failure, remove the key switch cover to reveal the small folded manual crank handle. Insert crank handle into the key switch and crank open or close the shutter.
For more information download our PDF's
Drives and controls for Roller Shutters with manual override