0151 424 8900

sales@nrgautomation.co.uk

Couper 24 - Swing Arm Kit 2m 400Kg's

Couper 24 - Swing Arm Kit 2m 400Kg's
  • Used to operate gates up to 2m wide and 400Kg's.
  • Each drive has one mechanical stop and requires an external physical stop.
  • The Control is the STARG8 -24 which is standard across the range with auto set up.
Click for brochure

Jet 24 Swing Arm Kit 3m 600Kg's

Jet 24 Swing Arm Kit 3m 600Kg's

JET Arms are 24Vdc for more intensive use and are used to operate gates up to 3m wide and 300 Kg's each.

  • Mechanical limit stops in each direction
  • Keylock override
  • Plug in connectors



Click for brochure

JET XL Swing Gate Drive 6m 750Kg's

JET XL  Swing Gate Drive 6m 750Kg's
  • Built to last in extreme weather conditions make this drive perfect for the UK.
  • Quick and easy installation with a rear fastening system that tilts to provide +/- 5 degree of play.
  • Mains 230Vac and 24Vdc versions available with mechanical stops.
  • Used with STAR G8 XL controller
Click for brochure

JET 230vac Swing Arm Kit 3m 600Kg's

JET 230vac Swing Arm Kit 3m 600Kg's
Used to operate gates up to 3m wide and 600Kg's.
  • Each drive has two mechanical stops.
  • The Control is the STARG8 -230 which is standard across the range with auto set up.

Click for brochure

Linear 500-24 Swing Arm Kit 4.5m 300Kg's

Linear 500-24 Swing Arm Kit 4.5m 300Kg's
  • Mechanically reliable thanks to the telescopic piston transmission and motor with 140°C thermal protection.
  • With Linear, the screw-on front and rear fixing brackets on the gear motor reduce installation times to a minimum. The 1.5 m pre-wired cable makes electrical connection easy.
  • In the event of power failure, manual operation is simple and intuitive using the release handle for insertion in the top of the operator.
Click for brochure

Linear 400-24 Swing Arm Kit 3m 300Kg's

Linear 400-24 Swing Arm Kit 3m 300Kg's
  • Mechanically reliable thanks to the telescopic piston transmission and motor with 140°C thermal protection.
  • With Linear, the screw-on front and rear fixing brackets on the gear motor reduce installation times to a minimum. The 1.5 m pre-wired cable makes electrical connection easy.
  • In the event of power failure, manual operation is simple and intuitive using the release handle for insertion in the top of the operator.
Click for brochure